by offering detailed analysis of defect points inside the pipe and the analysis results.
For the first time in the world, the RoboEye S camera provides a clear Full HD picture quality with no noise at all, even if it is connected to a very long cable of up to 1150ft(350m).
It also provides stable images inside the sewer line without trembling or breaking image quality in real time.

by offering detailed analysis of defect points inside the pipe and the analysis results.
For the first time in the world, the RoboEye S camera provides a clear Full HD picture quality with no noise at all, even if it is connected to a very long cable of up to 1150ft(350m).
It also provides stable images inside the sewer line without trembling or breaking image quality in real time.

When the camera is mounted on a push rod alone, then it can be inserted from a minimum of 4-inch (100mm) diameter tube and photographed from a minimum 5-inch (125mm) pipeline when equipped with a transporter.

When the camera is mounted on a push rod alone, then it can be inserted from a minimum of 4-inch (100mm) diameter tube and photographed from a minimum 5-inch (125mm) pipeline when equipped with a transporter.

The camera unit is compatible with both the basic standard tractor and the ROBOCAM S mini tractor; with this connector, which is ergonomically designed, camera unit can be separated from various sizes of tractors and assembled on the contrary.

The camera unit is compatible with both the basic standard tractor and the ROBOCAM S mini tractor; with this connector, which is ergonomically designed, camera unit can be separated from various sizes of tractors and assembled on the contrary.

The lighting in revolving camera lens has 6 units of the semi-permanent Super White LED lighting installed, which does not require a repair, and the front lamps are also equipped with 6 units that there is no problem in shooting up to 24-inch(600mm) diameter pipe.
In addition, when Crown Lamp Kit and Tractor Bumper Lamp Kit is installed, it can view up to 50-inch(1250mm) diameter pipe.

It is equipped with an infrared sensor that can measure the diameter of the pipe by default, and the users can add-on Laser Measurement function or 120x Optical Zoom function as options.

The RoboEye S is designed to allow all core parts to be simply replaced and all repairs to be made by the users from the initial design.
If the lighting does not work, then the lighting block can be replaced; if the camera does not operate, then the camera PCB board and module can be replaced; if the camera oes not rotate, then the rotation unit can be replaced – as mentioned, users can easily replace the faults in the field.

The replacement parts that can be ordered online should be much cheaper than the expectations of the users, and it will be delivered to their front door within three business days.